› Sea-Dog cando 10 3382 2 3

Sea-Dog Line Take-Apart Hinge Investment Cast 316 Stainless Steel #10 Fastener 3-1/2 x 2

Price is for PK. Manufacturer Part Number: 205275-1 Corrosion resistant cast 316 stainless Take-Apart Hinges allow a door or lid to be removed after installation without having to remove the fasteners. Surface mounted. Can be used horizontally or... more

Sea-Dog Line 205285 Long Reach Hatch Hinge | Investment Cast 316 Stainless Steel | #10 Fastener | 3-1/2 x 2-7/8

This Long Reach Hatch Hinges feature a removable clevis pin with split ring for easy separation. Particularly suited for wider doors or hatches where a greater spread is required. Constructed of corrosion resistant investment cast 316 stainless steel.... more

Sea-Dog Line Combination Bow Light 4-1/16 x 3-3/16 Low Profile

Low Profile Combination Bow Light is for replacement of existing lighting (not for new construction). Lens can be reversed for under mounting. Constructed of die cast chrome zinc. Installs with two #10 FH fasteners (not included). Recommended for use... more

Sea-Dog 520040-1 Bronze Garboard Drain and Plug - 1/2 NPT

Machined bronze Garboard Drain & Plug provides drainage for bilge during haul-out. 1/2� NPT tapered thread plug provides a watertight seal with 2� diameter flange. Plug has a square top for use with a socket wrench. Installs with three #10 FH... more

Sea-Dog 351350-1 Pipe Deck-Fill - GAS

Pipe deck fills are constructed of corrosion resistant cast 316 stainless steel. Designed to be used in conjunction with 1-1/2 - 11-1/2 NPSM straight threaded pipe. All fills and replacement caps include attachment chain. Installs with three #10 FH... more

New Tie Down Eye Straps sea-dog Line 081252-1 3/8 x 2 x C 3-1/8 Fastener #10

Price is for PK. Manufacturer Part Number: 081252-1 Commonly used to hold down batteries fuel tanks ice chests life rafts dinghies etc. these tie down eye straps can be used for a multitude of applications. Their flat low profile makes them ideal for... more

Sea-Dog Double Braided Nylon Dock Line - 3/8 x 10 - White | Bundle of 2

Double Braided Nylon Dock Line - 3/8 x 10 - White Features: Double Braided Nylon Dock Lines 100% premium double braided nylon Professionally spliced soft eye at one end Yacht whipped at the bitter end and splice point This is a bundle of 2 more

New Pad Eyes - Stainless sea-dog Line 081102 1/2 x 9/16 x C 1-3/8 Fastener #10 RH

Price is for EA. Manufacturer Part Number: 081102 Great for block attachment controlling lead lines or creating tie down points pad eyes can be used for a variety of applications. Installs with two RH fasteners (not included). Constructed of stamped... more

New Angled Deck Hinge sea-dog Line 270230-1 Pin 1/4 Bolt Base 3/4 x 2-1/4 Fastener #10

Stainless Steel Angle Base Deck Hinge Deck Hinges are designed to mount horizontally and attach an eye end secured to tubing in Bimini top applications. Concave Hinges are designed to rail mount on 7/8� tubing. Angled Hinges are used for mounting... more

New Side Lights - Flush Mount sea-dog Line 400180 7-3/4 x 2-5/16 Fastener #4 RH

Stamped 304 stainless. Light arc is 10 pts. 112.5. port and starboard. MFG# 400180 UPC# 035514400664 more

New Gas Lift Mount sea-dog Line 321583-1 Flush mount Mtg Hole 3 Stainless Steel Finish 2.25 x .500 x C 1.45

Flush Gas Lift Mount Flush Gas Lift Mounts are constructed of stamped 304 stainless steel. Used for mounting gas filled lift springs. Installs with three #10 RH fasteners (not included). 10 mm ball. Product : SEA DOG SS FLUSH GAS LIFT MOUNT... more

Sea-Dog Corp Eyebolt 5/8 SS 3/8 X 2 080495

Sea Dog 080495 Eyebolt 5/8In Ss 3/8In X 2In Eyebolt - Stainless Eyebolt with shoulder helps spread the load over a broader area. Machined AISI 304 stainless steel. Metric threads. Attributes: Pack = Bulk A = 3/8 - 10 mm B = 3-3/8 C = 5/8 D = 1-15/16 E... more

Sea-Dog Line Boat Pad Eye 081200 | Stainless Steel 5/16 Inch (Set of 10)

Boat part number 1103203 is a new set of (10) pad eyes from Sea-Dog Line part number 081200 . These pad eyes are constructed out of 304 stainless steel. They measure approximately 1 7/8 L x 1/2 W x 1/2 H overall. They mount via (2) 3/16 Dia. mounting... more

Sea Dog Boat Rod Holder 325246C1 | Rinker Stainless Steel 10 1/8 Inch

Boat part number 1061830 is a new rod holder from Sea Dog part number 325246C1 . Commonly used on Rinker boats part number 220846 . This rod holder is constructed out of stainless steel. Measures approximately 10 1/8 H x 4 1/2 L x 3 3/8 W overall.... more

Sea Dog Marine 357090-1 Gas Keyless Cap for 3-357090-1 Red

Injection molded fiberglass filled nylon. Does not require grounding. Each deck fill has a special cap with a built-in key for easy cap removal. Cap threads are 1-1/4 x 11-1/2 NPSM-Straight. Gas diesel & water caps include safety chain. # 10 fastener.... more

Sea-Dog Line LED Fold Down All Around Pontoon Light 9 USCG 2 NM

These LED Fold Down 360° All Around Pontoon Lights are approved for USCG 2 NM (Colreg 2 mile). Mounts on 1-1/4 square tubing. Constructed of injection molded nylon and aluminum. Installs with three #10 FH fasteners (not included). 12VDC. Low amp draw.... more

Sea Dog Garboard T-Handle Drain and Plug 1/2 NPT

Die cast bronze Garboard Drain & Plug provides drainage for bilge during haul-out. 1/2� NPT tapered thread plug provides a watertight seal with 2� diameter flange. Plug has a square T-top for manual tightening or removal. Installs with three #10 FH... more

Sea-Dog 273200-1 Nylon Deck Hinge and #10Fh Fastener - Black

Deck hinges are designed to mount horizontally and attach an eye end secured to tubing in Bimini top applications. UV stabilized injection molded nylon construction. Installs with two #10 FH fasteners (not included). 3/16� pin size. more

Sea-Dog 273230-1 Line Deck Hinge - 7/8 Angled Black

Deck hinges are designed to mount horizontally and attach an eye end secured to tubing in Bimini top applications. UV stabilized injection molded nylon construction. Installs with two #10 FH fasteners (not included). 3/16� pin size. more

Sea-Dog 273241-1 Top Mount 7/8 Concave Deck Hinge Fitting - White

Deck hinges are designed to mount horizontally and attach an eye end secured to tubing in Bimini top applications. UV stabilized injection molded nylon construction. Installs with two #10 FH fasteners (not included). 3/16� pin size. Concave hinges... more

Sea Dog 002090; Clam Cleat Midi Cl209

New Clamcleat Rope Cleat sea-dog Line 002090 Model CL209 - Midi Line Size Up to 5/16 2-7/8 x 3/4 Fastener #10 : Clamcleats are marine grade nylon cleats. Ideal for most applications where high loads or rope surges are not likely to be encountered.... more