You're in Home Hardware
Need a Personal Shopper?
Subscribe to
Bizrate emails for the hottest
deals & products,
PLUS a chance to
WIN $25
sign me up!
New winners chosen weekly.
No purchase necessary.
Best Seller | This is an E-tab tandem roller assembly with two 1-1/2 in. concave steel ball-bearing rollers. As the corner screw passes through the E- tab it captures the roller assembly and positions it in the door's bottom rail. The housing is 11/16 in. wide with... ... more | go to store |
This is a plain back tandem roller assembly with two 1-1/2 in. concave or grooved steel ball bearing rollers. The stamped steel housing is adjustable and is used by a variety of manufacturers of vinyl, aluminum or wood doors. The housing is a plain... ... more | go to store |
Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This sliding screen door corner... ... more | go to store |
This is a plain back tandem plain back roller assembly with two 1-1/2 in. concave or grooved steel ball bearing rollers. The stamped steel housing is adjustable. Used by Keller as well as a variety of other manufacturers, primarily on vinyl patio... ... more | go to store |
This is a plain back tandem roller assembly with two 1-1/4 in. concave steel ball bearing rollers. The stamped steel housing is adjustable. Used by Milgard as well as a variety of other manufacturers, primarily on vinyl patio doors. The housing is... ... more | go to store |
This is a C-tab tandem roller assembly with two 1-1/8 inch steel ball-bearing rollers. The C-tab fits around the corner screw and is captured by the side stile and bottom rail as they are drawn together. The adjustable stamped steel housing is 11/16... ... more | go to store |
This is a reversed F-tab tandem roller assembly. The adjustable stamped steel housing is 11/16 in. wide, 1-1/8 in. tall with a flare width of 13/16 in.. There are two 1-1/4 in. concave or grooved steel ball bearing rollers. Used by Fleetwood and a... ... more | go to store |
This is a plain back tandem roller assembly used by Armour Vue, Atlas and a variety of sliding patio door manufacturers. It has in-line tandem inner housing with two 1-1/2 in. concave steel ball bearing rollers set in a stamped steel housing with rear... ... more | go to store |
This is a B-tab tandem roller assembly. The adjustable stamped steel housing is 11/16 in. wide, 1-1/16 in. tall with a flare width of 13/16 in.. The B- tab secures the assembly as the mounting screw is driven up through the B-tab hole and into the... ... more | go to store |
This is an extra heavy-duty plain back, tandem roller assembly used by Kawneer on their heavy doors. Often found in Hawaii used on door walls, it has an in-line tandem inner housing with 1-1/2 in. concave or grooved steel ball bearing rollers set in a... ... more | go to store |
This is an S-tab tandem roller assembly with two 1-1/2 in. concave nylon ball bearing rollers. When the corner screw passes through the S-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The... ... more | go to store |
This is a stainless steel, unique housing, tandem roller assembly often found on Andersen patio doors as well as a variety of other manufacturers of wood patio doors. It has two 1-1/2 in. concave stainless steel ball bearing rollers set in a stainless... ... more | FREE shipping go to store |
This tandem wheel roller assembly is constructed of a pair of steel wheels and an adjustable steel housing. Each wheel has a concaved edge and features a steel inner race, steel ball bearings and a 5/16 in. roller width. The outside diameter of these... ... more | go to store |
This is a universal design roller. It has a 1-1/4 in. steel ball bearing roller. Adjustable diecast housing assembly. Used by Fleetwood, Full view and a variety of other glass door manufacturers. | Prime-Line Roller Assembly, 1-1/4 in. Steel Ball... ... more | go to store |
This Mirror Door Roller is constructed of an extruded aluminum housing, and it comes in a milled aluminum finish. This housing bracket also features a round extruded boss, and it is used by Monarch Door Company on their “500” series aluminum-framed... ... more | go to store |
This is a plain back patio door roller assembly with a 1-11/16 in. concave or grooved nylon ball bearing roller used by Arcadia and a variety of other patio door manufacturers. The stamped steel housing has a unique design that is 3/4 in. wide, 1-5/16... ... more | go to store |
This is a 1-1/4 in. steel ball bearing roller with adjustable steel housing assembly. Replaces old-style extruded aluminum assembly. 3/4 in. overall thickness at dimples. Used by International and a variety of other glass door manufacturers. |... ... more | go to store |
This is an diecast plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. Its plain back diecast is 13/16 in. wide, 1-3/16 in. tall and 1-1/2 in. long. There is a 1/4-20 threaded mounting hole in the back end and a... ... more | go to store |
Replace or repair broken or missing sliding door rollers with this Prime-Line D 1998 Steel Sliding Door Roller Assembly. The stamped steel patio door rollers replacement is adjustable. This door roller assembly is used by a variety of metal framed... ... more | go to store |
This is a F-tab patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. It is rear adjusting with a 1/4-20 threaded mounting hole on the back end and an optional use #10-32 threaded hole on top. Used by Fleetwood and a... ... more | go to store |
This roller is constructed from steel. It comes affixed to an adjustable steel housing with an 1-1/4 in. diameter roller. Used by a variety of glass door manufacturers. | Prime-Line Sliding Door Roller Assembly, 1-1/4 in. Diameter, Steel Ball Bearing... ... more | go to store |
This pocket door roller assembly is constructed of a steel bracket housing, and it comes in a zinc colored finish. The bracket’s base measures 2-1/2 inch x 1-3/8 inch, and the wheel has a maximum adjustment height of 2-1/4 inch. From the lowest... ... more | go to store |
This is a steel tandem C-tab roller assembly with 1-1/4 in. steel ball bearing rollers. The C-tab fits around the corner screw and captured by the side stile and bottom rail as they are drawn together. The adjustable stamped steel housing is 11/16 in.... ... more | go to store |
This is a unique housing patio door roller assembly. It is 3/4 in. wide and 2-1/8 in. long with a 1-1/4 in. diameter steel ball bearing roller attached. To install, remove the screw from the back and insert the assembly into the bottom rail end.... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/8 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 5/8 in. wide, 1 in. tall and 2-1/8 in. long. It is rear adjusting with a 1/4-20 threaded mounting hole on... ... more | go to store |
This is a Plain back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 in. wide with a 27/32 in. flare, 1-1/8 in. tall and 2-7/16 in. long. It is rear adjusting with a... ... more | go to store |
This is a unique back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a unique back housing made of extruded aluminum. The housing is 7/8 in. 1-3/16 in. tall and 2-1/16 in. long. This style of unique... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 21/32 in. wide with a 3/4 in. flare and 1-1/8 in. tall. It is rear adjusting with a threaded mounting... ... more | go to store |
This is a plain back tandem roller assembly with two 1 in. concave ball bearing rollers. The stamped steel housing is adjustable and is used by a variety of manufacturers of vinyl, aluminum or wood doors. The housing is 11/16 in. wide, 1-1/32 in. tall... ... more | go to store |
This is an F-tab patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The... ... more | go to store |
This is a sliding window roller assembly used as a bottom roller on heavy sliding glass windows. It has an adjustable steel housing and steel ball-bearing center groove roller. | Prime-Line 27/32 in, Sliding Window Roller Assembly w/ Steel Ball Bearing... ... more | go to store |
This is a unique housing tandem roller assembly used by a variety of manufacturers of sliding patio doors. It has two 1-1/4 in. concave or grooved steel ball bearing rollers set in line in a stamped steel housing with end adjustment . The square shaped... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 9/16 in. wide with a 13/16 in. flare and 1-3/16 in. tall. It is rear adjusting with a threaded mounting... ... more | go to store |
This is an F-tab patio door roller assembly with a 1-1/4 in. concave steel ball-bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The... ... more | go to store |
This is a unique housing patio door roller assembly. It is 23/32 in. wide, 1-7/8 in. tall, and 2-1/8 in. long with a 1-1/4 in. diameter steel ball-bearing roller. To install, remove the screw from the back and insert the assembly into the bottom rail... ... more | go to store |
This is a F-tab patio door roller assembly with a 1-1/4 in. concave Plastic ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The... ... more | go to store |
Ads related to Prime-Line 1-1/4 in. Tandem Stainless Steel Roller Assembly w/ Ball Bearing Rollers Single Pack 9.44 H x 3.82 W x 0.63 D in brown | Wayfair