Hunting & Archery Equipment › Vortex › rovkeav picatinny rail scope mount

Vortex Optics Tactical Scope Rings - Tactical 30mm Ring Medium Sold Individually

Mounting to a Picatinny rail-The wide, 6-screw Tactical ring offers solid support for 30mm riflescope tubes. Scope Ring Heights are measured from the base of the ring to the center of the riflescope tube. Sold one ring per package. Mfg: Vortex Optics... more

Vortex Optics Tactical Scope Rings - Tactical 30mm Ring Low (.83 ) Sold Individually

Mounting to a Picatinny rail-The wide, 6-screw Tactical ring offers solid support for 30mm riflescope tubes. Scope Ring Heights are measured from the base of the ring to the center of the riflescope tube. Sold one ring per package. Mfg: Vortex Optics... more

Vortex Optics Tactical 30mm Riflescope Ring — Low Height [0.83 Inches | 21.0 mm]

Robust 6-screw Tactical Ring is perfect for mounting red-dot optics magnifiers and other accessories with 30mm tube diameters to your Picatinny rail. more

Vortex Optics Hunter Low Mounting Scope Rings for 1 Riflescopes - RING-L

Mounting to a Picatinny or Weaver type rail the standard 2 screw Hunter rings are a nice match for general hunting setups. Made from aircraft grade 6061 T6 aluminum for optimum strength. Available in three heights for 1 inch tubes. They do not... more

Vortex Precision Matched Rings for Picatinny Rails (30mm, Aluminum, 0.97" Height) PMR-30-97

[Pre Order - allow extra time] Vortex Precision Matched Rings for Picatinny Rails (30mm, Aluminum, 0.97" Height) Holds Riflescope with 30mm Maintube, Mount Scope to Picatinny Rails, Positions Scope 0.97" from Base, Grade 8 Fasteners, CNC Machined with... more

Vortex Precision Matched Rings for Picatinny Rails (30mm, Aluminum, 0.87" Height) PMR-30-87

Vortex Precision Matched Rings for Picatinny Rails (30mm, Aluminum, 0.87" Height) Holds Riflescope with 30mm Maintube, Mount Scope to Picatinny Rails, Positions Scope 0.87" from Base, Grade 8 Fasteners, CNC Machined with Tolerance of 0.0005", Vibratory... more

Vortex Precision Matched Rings for Picatinny Rails (34mm, Aluminum, 0.92" Height) PMR-34-92

Vortex Precision Matched Rings for Picatinny Rails (34mm, Aluminum, 0.92" Height) Holds Riflescope with 34mm Maintube, Mount Scope to Picatinny Rails, Positions Scope 0.92" from Base, Grade 8 Fasteners, CNC Machined with Tolerance of 0.0005", Vibratory... more

Vortex Cantilever 30mm Mount (2" Offset) CM-202

FREE BONUS w/PURCHASE! Vortex Cantilever 30mm Mount (2" Offset) For 30mm Maintubes, 2" Forward Offset, Works with Flattop AR-15 Rifles, Holds Center at 1.59", Picatinny/Weaver Rail Mount, 6061-T6 Anodized Aluminum more

Vortex Cantilever 30mm Mount (3" Offset) CM-203

Vortex Cantilever 30mm Mount (3" Offset) For 30mm Maintubes, 3" Forward Offset, Works with Flattop AR-15 Rifles, Holds Center at 1.59", Picatinny/Weaver Rail Mount, 6061-T6 Anodized Aluminum RIFLESCOPES-Scope Rings more

Vortex Optics Tactical Scope Rings - Tactical 30mm Ring High (1.18 ) Sold Individually

Mounting to a Picatinny rail-The wide, 6-screw Tactical ring offers solid support for 30mm riflescope tubes. Scope Ring Heights are measured from the base of the ring to the center of the riflescope tube. Sold one ring per package. Mfg: Vortex Optics... more

Vortex Optics 45 Degree Red Dot Mount - 45� Red Dot Mount

Machined from aluminum, anodized Black, this 45� Side Mount will mount to any Picatinny-style rail. Ambidextrous design allows for perfect mounting of a red dot or reflex backup sight to your AR-15. Mfg: Vortex Optics more

Vortex Optics Rail Mounted Battery - Battery Holder For Cr 2032 Battery

Be prepared with a back-up battery. Battery holder mounts conveniently on a Picatinny rail. Holds one battery. Watertight,dustproof storage. Retaining cable secures battery holder cap and prevents loss. Quick access and mounting with a coin, tip of... more

Vortex 1-Inch R.Scope Rings (Low Set of 2) Picatinny/Weaver Mount (2 Pack)

Mounting to a Picatinny or Weaver type rail the standard 2-screw Hunter rings are a nice match for general hunting setups. Made from aircraft-grade 6061-T6 aluminum for optimum strength. more

Vortex 1-Inch R.Scope Rings (Low Set of 2) Picatinny/Weaver Mount (6 Pack)

These aluminum 1-Inch Riflescope Rings from Vortex fit riflescopes with a 1.0 main-tube. These rings position the centerline of the scope 0.63 / 16mm above the top of the mounting rail. They are manufactured from 6061-T6 aluminum and they re compatible... more

Vortex 1-Inch R.Scope Rings (Low Set of 2) Picatinny/Weaver Mount (3 Pack)

These aluminum 1-Inch Riflescope Rings from Vortex fit riflescopes with a 1.0 main-tube. These rings position the centerline of the scope 0.63 / 16mm above the top of the mounting rail. They are manufactured from 6061-T6 aluminum and they re compatible... more

Vortex Precision Matched Rings for Picatinny Rails (34mm, Aluminum, 1.45" Height) PMR-34-145

Vortex Precision Matched Rings for Picatinny Rails (34mm, Aluminum, 1.45" Height) Holds Riflescope with 34mm Maintube, Mount Scope to Picatinny Rails, Positions Scope 1.45" from Base, Grade 8 Fasteners, CNC Machined with Tolerance of 0.0005", Vibratory... more

Vortex Precision Matched Rings for Picatinny Rails (34mm, Aluminum, 1.1" Height) PMR-34-1.1

Vortex Precision Matched Rings for Picatinny Rails (34mm, Aluminum, 1.1" Height) Holds Riflescope with 34mm Maintube, Mount Scope to Picatinny Rails, Positions Scope 1.1" from Base, Grade 8 Fasteners, CNC Machined with Tolerance of 0.0005", Vibratory... more

Vortex Viper Extended Cantilever Mount for 1" Riflescopes (Matte Black) CVP-1

Vortex Viper Extended Cantilever Mount for 1" Riflescopes (Matte Black) For 1" Maintubes, Provides Cantilever Forward Placement, Holds Line of Sight at 1.435" Above Base, Picatinny/Weaver Rail Mount, Aluminum Construction, Made in the USA... more

Vortex 45 Degree Red Dot Mount Black Low 45RDM

Vortex 45 Degree Red Dot Mount Black Low 45RDM. Vortex Optics machined these Red Dot Sight Mounts from rugged lightweight aluminum. This Vortex 45-Degree Picatinny Mount is compatible with any Mil-Spec 1913 rail. Use the Vortex 45 Degree Offset Mount... more

Vortex Cantilever Ring Mount for 1-Inch Tube w/ 3in Offset 1.59in/40.39mm Black CM-103

Vortex Cantilever Ring Mount for 1-Inch Tube w/ 3in Offset 1.59in/40.39mm Black CM-103. This rail mount engineered by the geniuses at Vortex Optics positions the center of the Rifle Scope tube at a height of 1.59 inches (40.39 mm) from the base. The... more

Vortex 1-Inch R.Scope Rings (Low Set of 2) Picatinny/Weaver Mount (4 Pack)

Set of Two Rings Fits 1.0 Main-Tube Scopes 0.63 / 16mm Mounting Height more

Vortex Optics Tactical 30mm Riflescope Ring ? Lower 1/3 Co-Witness [1.57 Inches | 40.0 mm] - 2 Pack

This robust 6 screw 30mm Ring is perfect for mounting red dot optics magnifiers and other accessories with 30mm tube diameters to your Picatinny rail. When using this ring to mount a conventional riflescope they strongly recommend lapping the rings for... more

Vortex 30mm Rifle Scope Ring High Profile Black

This robust 6 screw 30mm Ring is perfect for mounting red dot optics magnifiers and other accessories with 30mm tube diameters to your Picatinny rail. When using this ring to mount a conventional riflescope they strongly recommend lapping the rings for... more

Vortex 30mm Rifle Scope Ring Medium Profile Black

This robust 6 screw 30mm Ring is perfect for mounting red dot optics magnifiers and other accessories with 30mm tube diameters to your Picatinny rail. When using this ring to mount a conventional riflescope they strongly recommend lapping the rings for... more

Vortex Optics Tactical 30mm Riflescope Rings TRH-2Pk High Height 1.18 Inches

TACTICAL 30MM RED DOT RING —High Height [1.18 Inches | 30.0 mm] Robust 6-screw Tactical Ring is perfect for mounting red-dot optics magnifiers and other accessories with 30mm tube diameters to your Picatinny rail. When using this ring to mount a... more

Vortex Optics Hunter 1 Riflescope Rings - High

Mounting to a Picatinny or Weaver type rail the standard Vortex Optics Hunter 1 Riflescope Rings are a nice match for general hunting setups. Made from aircraft-grade 6061-T6 aluminum for optimum strength and durability. Available in three heights for... more

Vortex Optics Hunter 1 Riflescope Rings - Medium

Mounting to a Picatinny or Weaver type rail the standard 2 screw Hunter rings are a nice match for general hunting setups. Made from aircraft grade 6061 T6 aluminum for optimum strength. Available in three heights for 1 inch tubes. They do not... more

Vortex Optics Tactical 30mm Riflescope Ring High (TRH)- 2 pack

These Tactical 30mm Riflescope Rings from Vortex are designed for mounting riflescopes with a 30mm main-tube to a Weaver or Picatinny mounting system. This single ring positions the center of the scope 1.18 /30mm above the mount. Includes: • (2)... more

Vortex Cantilever Mount 1-inch 2 Offset Rings

The Vortex Cantilever Mount with 2 Offset is designed for 1 sights and will move the scope 2 forward for proper eye relief and head placement on sporting-style firearms. It features an aluminum construction and will fit Picatinny rails also it will... more

Vortex Viper Extended Cantilever Mount for 34mm Riflescopes (Matte Black) CVP-34

Vortex Viper Extended Cantilever Mount for 34mm Riflescopes (Matte Black) For 34mm Maintubes, Provides Cantilever Forward Placement, Holds Line of Sight at 1.435" Above Base, Picatinny/Weaver Rail Mount, Aluminum Construction, Made in the USA... more

Vortex Viper Extended Cantilever Mount for 30mm Riflescopes (Matte Black) CVP-30

Vortex Viper Extended Cantilever Mount for 30mm Riflescopes (Matte Black) For 30mm Maintubes, Provides Cantilever Forward Placement, Holds Line of Sight at 1.435" Above Base, Picatinny/Weaver Rail Mount, Aluminum Construction, Made in the USA... more

Vortex Pro Series Riflescope Ring Pair (30mm, Aluminum, Medium, Matte Black) PR30-M

Free Express Shipping! Vortex Pro Series Riflescope Ring Pair (30mm, Aluminum, Medium, Matte Black) 1.0" Height Off Rail, Anodized 7075-T6 Aluminum, Picatinny/Weaver Rail Mount, One Pair of Rings more

Vortex Pro Series Riflescope Ring Pair (30mm, Aluminum, Extra-High, Matte Black) PR30-XH

Free Express Shipping! Vortex Pro Series Riflescope Ring Pair (30mm, Aluminum, Extra-High, Matte Black) 1.54" Height Off Rail, Anodized 7075-T6 Aluminum, Picatinny/Weaver Rail Mount, One Pair of Rings more

Vortex Pro Series Riflescope Ring Pair (30mm, Aluminum, Low, Matte Black) PR30-L

Free Express Shipping! Vortex Pro Series Riflescope Ring Pair (30mm, Aluminum, Low, Matte Black) 0.9" Height Off Rail, Anodized 7075-T6 Aluminum, Picatinny/Weaver Rail Mount, One Pair of Rings more

Vortex Pro Series Riflescope Ring Pair (1", Aluminum, Medium, Matte Black) PR1-M

Free Express Shipping! Vortex Pro Series Riflescope Ring Pair (1", Aluminum, Medium, Matte Black) 0.95" Height Off Rail, Anodized 7075-T6 Aluminum, Picatinny/Weaver Rail Mount, One Pair of Rings more

Vortex Optics Hunter Scope Rings - Hunter Rings 1" Hight (1.22)

Mounting to a Picatinny or Weaver type rail-The standard, 2-screw Hunter rings are a nice match for general hunting setups.Made from aircraft-grade 6061-T6 aluminum for optimum strength. Scope Ring Heights are measured from the base to the center of... more

Vortex Optics Hunter Scope Rings - Hunter Rings 30mm Medium (.94 )

Mounting to a Picatinny or Weaver type rail-The standard, 2-screw Hunter rings are a nice match for general hunting setups.Made from aircraft-grade 6061-T6 aluminum for optimum strength. Scope Ring Heights are measured from the base to the center of... more

Vortex Optics Hunter Scope Rings - Hunter Rings 30mm High (1.22 )

Mounting to a Picatinny or Weaver type rail-The standard, 2-screw Hunter rings are a nice match for general hunting setups.Made from aircraft-grade 6061-T6 aluminum for optimum strength. Scope Ring Heights are measured from the base to the center of... more