Hunting & Archery Equipment › ptg pilot bushing set 284

PTG Pilot Bushing Set 277 Caliber 9 Piece SKU - 604593

Any gunsmith who does a great deal of work on a specific caliber needs a pilot set. These nine-piece sets are specially ground over and undersized .0002 22 to 243/6mm caliber, 25 to 7mm/284 caliber and 30 caliber and up.The bushings come in 0.2708,... more

PTG Pilot Bushing Set 22 Centerfire 9 Piece SKU - 560902

Any gunsmith who does a great deal of work on a specific caliber needs a pilot set. These nine-piece sets are specially ground over and undersized .0002 22 to 243/6mm caliber, 25 to 7mm/284 caliber and 30 caliber and up.Bushings come in 0.2194, 0.2192,... more

Hornady Match Grade Die Set 6.5-284 Norma .264 544295

Hornady Match Grade Die Set 6.5-284 Norma .264 544295. These Hornady reloading tools give you total control over neck tension in the resizing process. These reloading tools feature the ability to use interchangeable self-centering neck size bushings... more

Hornady Match Grade Die Set 280 Ackley IMP .284 544323

Hornady Match Grade Die Set 280 Ackley IMP .284 544323. These Hornady reloading tools give you total control over neck tension in the resizing process. These reloading tools feature the ability to use interchangeable self-centering neck size bushings... more

Redding Reloading Type S-Match Full Die Set - 284 Winchester 36141

Redding Reloading Type S-Match Full Die Set - 284 Winchester 36141. Redding Reloading designed these Reloading Dies with an adjustable decapping rod that lets you adjust your bushing position for a guaranteed fit. With this Redding Reloading Type... more

Redding Type-S Elite Bushing Die Set - 6.5-284 Norma Bushing Die Set

INCLUDES Type S Bushing Full Sizing Die Type S Bushing Neck Sizing Die Competition Seating Die Redding Reloading Equipment has once again established a new die set based on customer feedback. The past few years you have seen the introduction of many... more

Redding Competition Bushing Neck Die Sets - 6.5mm-284 Winchester Bushing Neck Die Set

Redding Competition Bushing Neck Die Set includes a Competition Bushing Neck Sizing Die, a Body Die, and a Competition Bullet Seater. Neck Sizing Die and Seater feature micrometer adjustments. Bushings and Shellholder sold separately. Competition... more

Redding Type S Match Bushing Full Die Sets - 284 Winchester Bushing Full Length Die Set

The Redding Type S Match Bushing Full Die Set contains a Type S Bushing Full Sizing Die and a Compeition Seating Die. The Type S Bushing Full Die allows full length resizing while maintaining exact control of the case neck. Interchangeable bushings... more

PTG Pilot Bushing Set 30 Caliber 9 Piece SKU - 637851

Any gunsmith who does a great deal of work on a specific caliber needs a pilot set. These nine-piece sets are specially ground over and undersized .0002 22 to 243/6mm caliber, 25 to 7mm/284 caliber and 30 caliber and up. The bushings come in 0.3008,... more

PTG Pilot Bushing Set 25 Caliber 9 Piece SKU - 593846

Any gunsmith who does a great deal of work on a specific caliber needs a pilot set. These nine-piece sets are specially ground over and undersized .0002 22 to 243/6mm caliber, 25 to 7mm/284 caliber and 30 caliber and up. Bushings come in 0.2508,... more

PTG Pilot Bushing Set 284 Caliber, 7mm 9 Piece SKU - 615807

Any gunsmith who does a great deal of work on a specific caliber needs a pilot set. These nine-piece sets are specially ground over and undersized .0002 22 to 243/6mm caliber, 25 to 7mm/284 caliber and 30 caliber and up.The bushings come in 0.2770,... more

PTG Pilot Bushing Set 24 Caliber 9 Piece SKU - 584340

Any gunsmith who does a great deal of work on a specific caliber needs a pilot set. These nine-piece sets are specially ground over and undersized .0002 22 to 243/6mm caliber, 25 to 7mm/284 caliber and 30 caliber and up.Bushings come in 0.2368, 0.2366,... more

PTG 11-Degree Muzzle Crown Facing Tool with 25 to 284 Caliber 4 Pilot Set (.249, .256, .270, .276) SKU - 669420

These piloted steel cutters allow quick, easy and accurate cutting of the popular 11 degree target crown. A 4-pilot set is included. Notes: Square shaft for use with tap wrenchComplete with four removable pilots, this cutter will quickly, easily, and... more

PTG 60-Degree Center Reamer with 25 to 284 Caliber, 7mm 4 Pilot Set (.249, .256, .270, .276) SKU - 726909

Use these piloted reamers to cut a 60 degree angle on the end of a barrel to ensure that the lathe center is concentric with the bore. Makes it easier to contour or profile the outside of the barrel accurately. A 4-pilot set is included. Right hand cut... more

Redding Reloading Type S Neck Die Set - 284 Winchester 78141

Redding Reloading Type S Neck Die Set - 284 Winchester 78141. Uses interchangeable sizing bushings available in .001 in. increments The adjustable decapping rod allows positioning the bushing to resize only a portion of the neck length if desired... more

PTG Nominal Pilot Bushing SKU - 885205

Bushings are nominal bore diameter for specific caliber. Bushings fit removable pilot tooling. SKU - 885205 more

Redding Reloading Type S-Match Full Die Set - 6MM/284 Winchester 36414

Redding Reloading Type S-Match Full Die Set - 6MM/284 Winchester 36414. Redding Reloading designed these Reloading Dies with an adjustable decapping rod that lets you adjust your bushing position for a guaranteed fit. With this Redding Reloading Type... more

PTG .705 Counterbore Reamer with 22 Caliber to 6mm 4 Pilot Set (.217, .218, .219, .236) SKU - 753187

A real time saver when rebarreling a Remington 700. This piloted counterbore cuts the .705" recess for the front of the bolt body. A 4-pilot set is included. Right hand cut and features a 3/8" (9.5mm) square drive shank. SKU - 753187 more

PTG .705 Counterbore Reamer with 30 Caliber and Up 4 Pilot Set (.300, .312, .330, .366) SKU - 799526

A real time saver when rebarreling a Remington 700. This piloted counterbore cuts the .705" recess for the front of the bolt body. A 4-pilot set is included. Right hand cut and features a 3/8" (9.5mm) square drive shank. SKU - 799526 more

Redding Reloading Type S Neck Die Set - 6MM/284 Winchester 78414

Redding Reloading Type S Neck Die Set - 6MM/284 Winchester 78414. Uses interchangeable sizing bushings available in .001 in. increments The adjustable decapping rod allows positioning the bushing to resize only a portion of the neck length if desired... more

Redding Reloading Type S-Match Full Die Set - 6.5-284 NORMA 36415

Redding Reloading Type S-Match Full Die Set - 6.5-284 NORMA 36415. Redding Reloading designed these Reloading Dies with an adjustable decapping rod that lets you adjust your bushing position for a guaranteed fit. With this Redding Reloading Type... more

RCBS MatchMaster Competition FL Bushing Set 6.5mm-284 Winchester 28708

RCBS MatchMaster Competition FL Bushing Set 6.5mm-284 Winchester 28708. These bushings work in conjunction with a seater die to provide a fully automatic seating system that will seat Bullets concentricity with micrometer accuracy every time Redding... more

PTG 60-Degree Center Reamer with 22 Caliber to 6mm 4 Pilot Set (.217, .218, .219, .236) SKU - 706786

Use these piloted reamers to cut a 60 degree angle on the end of a barrel to ensure that the lathe center is concentric with the bore. Makes it easier to contour or profile the outside of the barrel accurately. A 4-pilot set is included. Right hand cut... more

PTG 11-Degree Muzzle Crown Facing Tool with 22 Caliber to 6mm 4 Pilot Set (.217, .218, .219, .236) SKU - 665761

These piloted steel cutters allow quick, easy and accurate cutting of the popular 11 degree target crown. A 4-pilot set is included. Notes: Square shaft for use with tap wrenchComplete with four removable pilots, this cutter will quickly, easily, and... more

PTG 96-Degree Piloted Barrel Counterbore with 30 Caliber and Up 4 Pilot Set (.300, .312, .330, .366) SKU - 110146

Used to cut the 96 degree counterbore at the breech end of the barrel. Required for the feed cone for the Winchester Pre-64 Model 70, Enfield and Springfield actions. A 4-pilot set is included. Notes: These tools are intended for use by professionals... more

PTG Pilot Bushing for Bolt Raceway Reamer, Receiver Reamer and Tap SKU - 794471

The PTG Pilot Bushing for Bolt Raceway Reamers, Receivers and Taps is a steel tapered pilot bushing. These bushing are designed for center tooling the action. To use the bushing, simply select the proper pilot bushing diameter that will enter the... more

PTG 11-Degree Muzzle Crown Facing Tool with 30 Caliber and Up 4 Pilot Set (.300, .312, .330, .366) SKU - 684575

These piloted steel cutters allow quick, easy and accurate cutting of the popular 11 degree target crown. A 4-pilot set is included. Notes: Square shaft for use with tap wrenchCutter quickly, easily and accurately cuts the popular 11 target crown SKU -... more

PTG 60-Degree Center Reamer with 30 Caliber and Up 4 Pilot Set (.300, .312, .330, .366) SKU - 732793

Use these piloted reamers to cut a 60 degree angle on the end of a barrel to ensure that the lathe center is concentric with the bore. Makes it easier to contour or profile the outside of the barrel accurately. A 4-pilot set is included. Right hand cut... more

Hornady Match Grade Die Set 7mm PRC .284 544319

Hornady Match Grade Die Set 7mm PRC .284 544319. These Hornady reloading tools give you total control over neck tension in the resizing process. These reloading tools feature the ability to use interchangeable self-centering neck size bushings that... more

PTG Nominal Pilot Bushing SKU - 334285

Bushings are nominal bore diameter for specific caliber. Bushings fit removable pilot tooling. SKU - 334285 more

Redding Type S Match Bushing Full Die Sets - 6.5-284 Norma Bushing Full Length Die Set

The Redding Type S Match Bushing Full Die Set contains a Type S Bushing Full Sizing Die and a Compeition Seating Die. The Type S Bushing Full Die allows full length resizing while maintaining exact control of the case neck. Interchangeable bushings... more

PTG Interchangeable Pilot Revolver Forcing Cone Cutter 18-Degree SKU - 812154

Easily cut a perfectly centered revolver forcing cone. Works in conjunction with a nominal pilot bushing (sold separately). Designed to cut a centered forcing cone on a revolver.Notes:5 degree duplicates Ruger factory dimension11 degree gives less... more

PTG Interchangeable Pilot Screw In Choke Tap Remington Rem Choke 12 Gauge SKU - 710932

This choke tap is for use with interchangeable pilot bushings. It may be used by hand, but best results will be achieved with the use of a lathe. Make sure to remove any existing choke or constriction in barrel before use. Notes:Tru-Choke for use with... more

Redding Reloading Competition Set - 284 Winchester 58141

Redding Reloading Competition Set - 284 Winchester 58141. Redding Reloading designed these Reloading Dies with their floating seating stem system that allows for tighter tolerances and improved performance. Each Redding Reloading Competition Bushing... more

Redding Reloading Competition Set - 6.5-284 NORMA 58415

Redding Reloading Competition Set - 6.5-284 NORMA 58415. Redding Reloading designed these Reloading Dies with their floating seating stem system that allows for tighter tolerances and improved performance. Each Redding Reloading Competition Bushing... more

PTG Revolver Cutter Tool Handle SKU - 636715

Tool steel cutter is used in conjunction with a nominal pilot bushing (sold separately) to adjust the barrel to cylinder gap, as well as to square the rear of the barrel face.Notes:Cutter Tool Handle for ECT/PTG Revolver Cutter SKU - 636715 more